Shop

Calibration of equipment and estimation of uncertainty

e-Learning, In-Person / Streaming

In this course, concepts of calibration and the estimation of its uncertainty are clarified, both for direct measurement equipment and for instrumental calibration. This will help you to better understand the equipment available in the laboratory and to have greater control over it, minimizing risks and complying with the Quality System according to UNE-EN ISO/IEC 17025:2017. To support this, practical examples will also be provided.

Enumeration of Somatic Coliphages in Water

Scheduled Courses

In-Person / Streaming

In the course, we will cover the implementation of the somatic coliphage enumeration method in water using standardized methods (ISO 10705-2:2001 / ISO 10705-3:2003), both with and without sample concentration, to allow for low counts in accordance with legislation.

Evaluation in Participation in Proficiency Testing Exercises

Scheduled Courses

e-Learning, In-Person / Streaming

In this course, we guide you on how to make the most of your participation in interlaboratory comparison exercises, while also analyzing in detail the required reference documentation, including its specific requirements (NT-03 and G-ENAC-14). We cover both the evaluation of the results obtained and the assessment of the providers involved in these exercises.

G-ENAC-25. Risk Analysis for Participation in Proficiency Testing for Internal Calibrations

Scheduled Courses

e-Learning, In-Person / Streaming

Starting from September 2024, all accredited laboratories performing internal calibrations will be required to carry out a risk analysis to determine whether participation in interlaboratory comparisons is necessary. This analysis will take into account the specific context of each laboratory, the activities it performs, and other methods that ensure the validity of the results. In this course, we will guide you step by step to master how to effectively conduct this risk analysis. We will provide you with all the key concepts to thoroughly understand how to evaluate risks, following the guidelines of G-ENAC 25, and help you apply best practices so that your laboratory complies with NT03 and can confidently face your analysis. An Excel risk analysis sheet is included. It is only compatible with Microsoft Office.

Instrumental Technique: Chromatography

Scheduled Courses

e-Learning, In-Person / Streaming

We will introduce you to the minimum parameters to consider for the proper definition of a chromatographic method and for establishing its controls. The concept of Instrumental Calibration will be reviewed in its different approaches (curve fitting with multiple points, use of the response factor, with and without internal standard, with and without matrix) along with the criteria for its evaluation. We will explain the validation parameters (linearity, trueness, and precision) and the estimation of the uncertainty of the results.

Instrumental Technique: ICP-MS

Scheduled Courses

e-Learning, In-Person / Streaming

We will introduce you to the minimum parameters to consider for the proper definition of an ICP-MS method and its control. The concept of Instrumental Calibration will be reviewed in its different approaches (curve fitting with multiple points, use of the response factor, with and without internal standard, with and without matrix) and the criteria for its evaluation. We will clarify and work on the validation parameters (linearity, trueness, and precision) as well as the estimation of the uncertainty of the results.

Laboratory Waste Management

Scheduled Courses

e-Learning

It is important to clarify good practices within a laboratory, regardless of the type of laboratory or the tests performed. It is also essential to understand the categories of non-hazardous waste that may be generated, as well as the different categories of hazardous waste and their incompatibilities. Knowing how to respond to accidents or incidents related to waste management is crucial. In addition, it is necessary to explain the proper procedures for transferring and handling generated waste. Understanding waste classifications according to applicable regulations, as well as their identification and labeling, is fundamental. All of these aspects aim to provide an appropriate management system for laboratories based on their waste generation, ensure the proper functioning of a laboratory—even in the management of hazardous or non-hazardous waste—and guarantee that waste management is carried out correctly and in compliance with current legislation.

Legionella spp. by culture (ISO 11731:2017): Key Steps to Achieve ISO 17025 Accreditation

Scheduled Courses

In-Person / Streaming

Quality Assurance of Measurements: Control Charts

Scheduled Courses

e-Learning, In-Person / Streaming

We explain how to comply with UNE-EN ISO/IEC 17025:2017 for conducting Quality Assessment of tests. In this course, we will focus on control charts: their design, implementation, and interpretation, in order to evaluate trends in the obtained results.

Quality Control in Microbiological Testing

Scheduled Courses

In-Person / Streaming

We teach you how to create control charts using the results from the validation of your analytical methods. You will learn how to use and evaluate the results of proficiency tests in which you participate. Additionally, we will introduce other control techniques to apply to your methods, such as tolerances, duplicates, and more.

Reference Strains and Culture Media Control

Scheduled Courses

e-Learning, In-Person / Streaming

We will explain how to work with reference strains and their application in culture media controls, validations, and quality controls, in accordance with UNE–EN ISO/IEC 17025:2017, taking into account UNE–EN ISO 11133:2014. We will also cover the different types of culture media and their controls, the various types of strains and reference materials, their preservation and handling, related procedures, and the records required to demonstrate traceability of the processes performed.

Regulation 808: Operation of Analytical Methods for Residues of Pharmacologically Active Substances Used in Food-Producing Animals

Scheduled Courses

e-Learning, In-Person / Streaming

Temperature Under Control: Apply ISO 7218:2024 Correctly

Scheduled Courses

In-Person / Streaming

The objective of this course is to clarify how to establish the working range to be applied in Microbiology incubators in order to control incubation temperatures, following the guidelines included in the reference standard ISO 7218:2024, and thus comply with these requirements, also within the accreditation process.

UNE–EN ISO/IEC 17025:2017 Standard

Scheduled Courses

e-Learning, In-Person / Streaming

The requirements of the new revision of UNE–EN ISO/IEC 17025:2017 are discussed to implement a quality system in accordance with them, with particular emphasis on the new aspects introduced in this update. The novelty of this course is that the standard is reviewed from the laboratory’s perspective, including practical examples and real-world insights drawn from extensive experience as auditors in analytical laboratory activities.

Waste Sampling According to UNE–EN 14899:2007 and UNE–CEN/TR 15310:2008

Scheduled Courses

In-Person / Streaming

Understand the regulations on waste management and sampling, waste sampling procedures, and the preparation of reports for basic waste characterization.

Filters